> ## Knowledge Base Index
> Fetch the complete knowledge base index at: https://help.tmdlocks.com/sitemap.xml
> Use this file to discover available pages before exploring further.
> Pure-Markdown content can be obtained by appending a '.md' suffix to the content URLs listed in the sitemap (without the trailing slash).

# Lock is unresponsive

When your lock is unresponsive, in most cases the battery is empty. In this article you can see how to check if the battery is empty, how to get the lock working again, and when to contact support.

###### Most likely cause
When the battery is completely empty, the lock will not respond to button presses and will not accept connections.

###### Checks to see if the battery is empty
* Hold the lock button. If the lock does not open and the emergency code does not start, the battery is most likely empty.
* Open the app. If the lock does not connect, the battery is most likely empty.

###### How to fix it
1. Charge the lock with the supplied cable.
2. Let it charge for a few minutes.
3. Open the app. The lock should make a connection automatically

Note: full charge from 0 to 100 percent takes about 2 hours.

###### Red flashing lights while charging
If you see red flashing lights while charging the lock, then please contact support.

###### If it still does not respond
* [Contact support](https://go.crisp.chat/chat/embed/?website_id=cac4b8fc-2312-4920-84ca-a21771a62ac9)